Inkbird IBS-TH1 Bluetooth Logger +IBS-M1 WiFi Gateway Wireless Indoor Monitoring

Description

Features:
☺
Flexible
Add an Inkbird M1 WiFi Gateway (sold separately) for data and alerts via the Internet, max 4 equipment at once.
It's BT(Bluetooth) enable without a gateway.
☺
Probe & Mode of IBS-TH1
Inside and the external probe is supplied. The inside probe can monitor spatial range T&H such as indoor and outdoor,
While external probe can monitor the liquid temperature. °C /°F mode and with magnet base.
☺
Remote Monitor and Real-Time Alarm
After the gateway is connected to the 2.4ghz WiFi network, the sensor is connected to the gateway via Bluetooth or wireless.
As long as your mobile device can connect anywhere you access the Internet, the notification and alarm will be pushed through the "Inkbird Pro "APP.
☺
Powerful&cloud-based Data Store
Get the Inkbird Pro app free. The data of the device can be stored in the cloud for 12 months.
On Inkbird Pro in real-time to check the data and record label, or by sending a CSV file to your electronic mailbox to export the data.
☺
Conveniently controlled by APP
By switching to ℃/℉ through the APP, you can more intelligently modify the name of the devices and display the accurate location of the devices through photos,
and provide instant temperature and humidity.
☺
IBS-M1 Gateway:
--Input Voltage: DC 5V, 1000mA
--Maximum Bluetooth Connection Distance: 164ft(the distance will be shorter if there are interferences)
--Wireless transmission frequency: 433Mhz
--Maximum Wireless Connection Distance: 300ft(the distance will be shorter if there are interferences)
--Maximum 4 equipment at one time
☺
IBS-TH1 :
--Temperature Range: -104~140°F (Inner Sensor)/ -104~212°F
(External Probe). -40~60°C (Inner Sensor)/-40~100°C (External Probe).
--Temperature Accuracy: Typical：±0.5°F /±0.3°C. Max: ±0.9°F /±0.5°C
(Inner Sensor), ±1°C (External Probe).
--Humidity Range: 0 - 99%RH
--Humidity Accuracy(25°C/77°F,20%~80%RH): Typical: ±3%RH Max: ±4.5%RH
--Humidity Accuracy(25°C/77°F,0%~100%RH): Typical: ±4.5%RH Max: ±7.5%RH
☺
Connect the devices in AP mode
1. Open the app and click “+” to start the connection.
2. Plugin the Inkbird Wi-Fi Gateway, choose the IBS-M1 WiFi Gateway, click “AP Mode” of the right top corner,
check if the light of Wi-Fi button is blinking slowly and confirm on your app if it is, then enter your Wi-Fi password to connect to a wireless network,
click "OK" to connect the devices ( IBS-TH1 ).
3. The app will redirect to your phone’s WLAN Setting interface, select the “SmartLife-XXXX” to directly connect to the router without typing in a password.
Go back to the app and enter the automatic connection interface to click“Done”.
4. Connection succeed.
--Press and hold the “Wi-Fi” button for 5 seconds to reset the Wi-Fi, then repeat the steps above to connect with your phone.
--After the gateway is connected to the 2.4Ghz WiFi network, the sensor is connected to the gateway via Bluetooth or wireless.
As long as your mobile device can connect anywhere you access the Internet, the notification and alarm will be pushed through the "Inkbird Pro" APP.
--The data of the device can be stored in the cloud for 12 months.
Click the "Export- CSV" button on the "Inkbird Pro" APP, and data from different periods will be sent to your mailbox in CSV format.
Package included:
1* IBS-M1 WIFI Gateway
(US Plug)
1* IBS-TH1 Humidity Monitors
1* Manual
On Mar-19-21 at 04:13:14 PDT, seller added the following information: